Hotspot Server

Hardware & Software
for
Hotel & Café

Category: AccessPoint_WDS Manufacturer: TP-Link

150Mbit AccessPoint, WDS/Repeater, 5-Port Switch, DD-WRT

Article No. 81709

TP-Link / Atheros 2.4GHz, 150Mbit 802.11n with 5 port Megabit Switch, preconfigured in WDS-Mode for minimal cable usage.

These access points enable you to build or extend an existing network. All clients which are either connected wirelessly or per cable via the 5 port switch, are intergral members of the network.

These access points are delivered preconfigured and installed with DD-WRT Software.
DD-WRT offers you stability and professional functionality.

5 pcs	5.3 % discount
50 pcs	Inquiry

Product Features

2.4 GHz, 802.11g, 802.11n, 150Mbit
Size: 174x118x33mm, 0.22kg
5-Port Megabit switch
1x 3dBi antenna
Wall mountable via 2 screws
Installed and preconfigured with DD-WRT
With integrated ´Sylbek Configuration Assistant´ you can easily switch between WDS and DualSSID mode

Bandwidths up to 40 Mbit net (TCP-throughput) can be achieved with this access point

All access points are preconfigured preconfigured for use in WDS mode with multiple access points (unique IP Address).
You will receive all access data in order to customise these preconfigured settings.

Installing these access points requires minimal cabling. The diagram below shows how the access points can function as a group. Each group consists of 1 main and many repeater access points, with the cable connected (the best) to the main access point. This cable can be extended out from the main access point.

Click on the picture for a better representation

Atheros WDS AccessPoints - DD-WRT

Wireless Network with with multiple access points in WDS and Repeater mode

If you only need a single unit from this product range or, all the access points will have a wired backhaul, then please have a look here at our simular but more suitable product: 150Mbit 802.11n AccessPoint, 5-Port Switch, DD-WRT

If you order 2 units from this product range then AccessPoint_01 and AccessPoint_02 will be delivered. Customers can connect the third AccessPoint_03 later without a cable if needed.

Should you for example want to connect a 5 floor building by deploying 15 access points, then 5 groups of 3 preconfigured units (IP: 01-15 different channels etc) will be delivered . Ideally the groups should be connected to the Main AccessPoint, centrally placed unit.

For wall mounting are boxies available, the smallest possible one is: Plastic box 240x175x50mm IP65 f. Router, Switch, AccessPoint

All access points are pre-configured and labelled so that you only have to position and connect up the units.
The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering): Username, Password, IP-Address, SSID_Name

This service costs a flat rate fee of €95 per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware.
If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).

	Further products
	t.shaper SBR460-1U-TS 649.00 EUR 772.31 € incl VAT
	Firewall SBR230-FW 329.00 EUR 391.51 € incl VAT
	Bridge 10km,70mb 330.00 EUR 392.70 € incl VAT
	NAS Server SBNS217R 439.00 EUR 522.41 € incl VAT

Hotspot Server

Hardware & Software for Hotel & Café

150Mbit AccessPoint, WDS/Repeater, 5-Port Switch, DD-WRT

TP-Link / Atheros 2.4GHz, 150Mbit 802.11n with 5 port Megabit Switch, preconfigured in WDS-Mode for minimal cable usage.

t.shaper SBR460-1U-TS

Firewall SBR230-FW

Bridge 10km,70mb

NAS Server SBNS217R

Hardware & Software
for
Hotel & Café