Home
Shop
Services
Solutions
Hotspot
Contact
Hotspot Server
Hardware & Software
for
Hotel & Café
Category:
AccessPoint_Bridge
Manufacturer:
Ubiquiti_Networks
2x Outdoor Wireless Bridge 802.11n 5GHz - 10km/70Mbit WPA2
Article No. 81702
Both Access Points come assembled with a built in 22dBi antenna, PoE adapter, 15m Cat5e outdoor cable, and are preconfigured as a wireless bridge
330.00 EUR
392.70 € incl. 19% VAT
Productfeatures for 1 access point
Processor: Atheros MIPS 24KC, 400MHz
Memory: 32MB SDRAM, 8MB Flash
Network: 1x RJ-45, 100 Megabit
2x2MIMO, 5180MHz-5825MHz, TX power: 23dBm/200mW
Size: 320x320x220mm, 1.5kg
Antena Gain: 22dBi, Beamwidth: 10°/10°
Operating Temperature: -30C to +75C, Humidity: 5 to 95% Condensing
IEEE 802.11n, ROHS, CE, FCC, DFS
Power: 24V, consumption Max 5.5W
Software: Linux 2.6
AirOS
, SDK available
Both Access Points are delivered pre-assembled and pre-configured so that anyone (including laymen) can connect 2 separate networks together. The standard configuration is optimised for a distance of 10km. A realised bandwidth of over 70Mbit nett can be achieved, which is comparable with a 100 Mbit cable connected network.
When installing, the so called Fresnel Zone should be taken into account. At 10km this amounts to over 11m (11m clearance in the middle of distance) considering the earth’s curvature. At 5km this is over 6m.
After installation you can change the following settings:
- Web access data, password, eventually username, IP, SSID (hidden)
- Change WPA2 key
- Adjust distance (delivery setting is 10km) if needed
- Change country (delivery setting is Germany) if needed.
- Change channel/frequency in range 5500 - 5700 MHz (delivery setting is 120/5600Mhz)
- After alignment the transmit power (delivery setting is 23dBm) must be reduced to 5 dBm.
Transmit power and frequency ranges for wireless networks on 5Ghz are uniformly set across Europe (ETSI EN 301 893 for 802.11h networks). Therefore DFS should be activated or the broadcast level should be reduced by 2 dBm, as the AirOS software does not implement dynamic reduction of power levels (TPC) when interference is present.
To assist easy alignment of the antenna, 4-LED's are provided of which 3 out of 4 should light up. You also have the facility to monitor the step less signal strength through the web interface.
Telephone support is available for this product.
Delivery contents:
2 Access Points with:
2x integrated antennas
2x fixing brackets (height adjustable) for mast mounting.
2x PoE adapter 24V 12W
2x 15m Cat5e outdoor cables
Further products
t.shaper SBR217-TS
475.00 EUR
565.25 € incl VAT
Bridge 4km,70mb
219.00 EUR
260.61 € incl VAT
Hotspot SBR217-HS
499.00 EUR
593.81 € incl VAT
Firewall SBR455-FW
535.00 EUR
636.65 € incl VAT
© Copyright 2003 - 2012
Sylbek - Internet Technology
