Home
Shop
Services
Solutions
Hotspot
Contact
Hotspot Server
Hardware & Software
for
Hotel & Café
Category:
AccessPoint_DualSSID
Manufacturer:
TP-Link
300Mbit 802.11n dual SSID AccessPoint, 5-Port Switch, DD-WRT
Article No. 81707
TP-Link / Atheros 2.4GHz, 300Mbit 802.11n with 5 Port Megabit switch, preconfigured for use in a cable connected network with multiple access points
This access point together with
Hotspot
Server gives you as the customer many advantages, which are described below.
Every access point features an public network (Hotspot) and a private network (LAN). Customers and guests connect with the Hotspot network and as soon as they wish to surf the internet, they will receive a welcome/login page, so they can login typping their username and password.
Clients can only connect to the private network (LAN) of the access point if they own the WPA key (employee). As soon as the client connect with access point they can then access the internet and exchange data with other LAN clients.
49.99 EUR
59.49 € incl. 19% VAT
5 pcs
6.4 % discount
50 pcs
Inquiry
Product Features
2T2R MIMO 2.4 GHz, 802.11g, 802.11n, 300Mbit
Size: 192x130x33mm, 0.3kg
5-Port Megabit switch
2x 3dBi antennas
Wall mountable via 2 screws
Installed and preconfigured with DD-WRTWith integrated ´Sylbek Configuration Assistant´ you can easily switch between
DualSSID
and
WDS
mode
Bandwidths up to 75 Mbit net (TCP-throughput) can be achieved with this access point
All access points are preconfigured for use in a cable connected network with multiple access points (unique IP Address). You will receive all access data in order to customise these preconfigured settings.
In order to save on cabling, you can use the existing 5 port switch (present in all access points) to extend a Cat5 cable. If a client does not have a WLAN network card you can connect it via cable to the nearest access point.
Click on the picture for a better representation
Wireless Network with with multiple PoE access points
If you can use a single cable for each access point (as in the diagram above) then you can also provide power over this cable. For these access points are optionally following products available:
PoE Passiv Set - Injector + 20m Cat5e Cable + Splitter
PoE 802.3af Adapter 48V & Splitter 5v 9v 12v
Plastic box 270x200x52mm IP65 f. Router, Switch, AccessPoint
All access points are pre-configured and labelled so that you only have to position and connect up the units.
The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering):
Username, Password, WPA_Key, IP-Address, Public_SSID_Name, Private_SSID_Name, Hide_Private_SSID
This service costs a flat rate fee of €120 net per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware.
If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).
Further products
Thin Client SBTC116
272.00 EUR
323.68 € incl VAT
Linksys SPA3000
63.95 EUR
76.10 € incl VAT
Firewall SBR410-1U-FW
469.00 EUR
558.11 € incl VAT
Firewall SBR455-FW
535.00 EUR
636.65 € incl VAT
© Copyright 2003 - 2012
Sylbek - Internet Technology
