Home
Shop
Services
Solutions
Hotspot
Contact
Hotspot Server
Hardware & Software
for
Hotel & Café
Category:
AccessPoint_WDS
Manufacturer:
Asus
Asus WDS AccessPoint, 5-Pprt Switch, 300Mbit 802.11n, DD-WRT
Article No. 81710
These Asus / Broadcom Access Points connect wirelessly to each other (WDS / Bridge). Clients can connect to any acess point wirelessly or per cable.
These access points enable you to build or extend an existing network. All clients which are either connected wirelessly or per cable via the 5 port switch, are intergral members of the network.
These access points are delivered preconfigured and installed with DD-WRT Software.
DD-WRT
offers you stability and professional functionality.
59.99 EUR
71.39 € incl. 19% VAT
5 pcs
5.2 % discount
50 pcs
Inquiry
Product Features
2T2R MIMO 2.4 GHz, 802.11g, 802.11n, 300Mbit
Broadcom Accelerange Technology sorgt für bessere Abdeckung bzw. Reichweite
Size: (WxHxD) 192x130x33mm, 0.3kg
5-Port Megabit switch
2x 2dBi antennas, detachable
Wall mountable via 2 screws
Installed and preconfigured with DD-WRT
With integrated ´Sylbek Configuration Assistant´ you can easily switch between
WDS
and
DualSSID
mode
Bandwidths up to 78 Mbit net (TCP-throughput) can be achieved wirelessly or per cable with this access point.
All devices are pre-configured for network operation. This means that the access points have a unique IP and MAC address (prerequisites for network operation). Customers will receive a setup guide from us as well as all the necessary access data in the event that the default configuration needs to be changed.
Installing these access points requires minimal cabling. The diagram below shows how the access points can function as a group. Each group consists of 2 or 3 accesspoints. The connection to the next group (next floor) can be extended with cable from the 5-Port switch.
See below for an example of a three floor building with 3 Access Points on each floor.
Click on the picture for a better representation
WDS access point installation for minimal use of cable
For wall mounting are boxies available, the smallest possible one is:
Plastic box 270x200x52mm IP65 f. Router, Switch, AccessPoint
The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering):
Username, Password, IP-Address, SSID_Name
This service costs a flat rate fee of €95 per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware.
If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).
Further products
3x Outdoor AP
290.00 EUR
345.10 € incl VAT
Hotspot SBR116-HS
469.00 EUR
558.11 € incl VAT
WRT54GL WDS
20.00 EUR
23.80 € incl VAT
Firewall SBR230-FW
329.00 EUR
391.51 € incl VAT
© Copyright 2003 - 2012
Sylbek - Internet Technology