Home
Shop
Services
Solutions
Hotspot
Contact
Hotspot Server
Hardware & Software
for
Hotel & Café
Category:
AccessPoint_DualSSID
Manufacturer:
Cisco_Systems
Linksys Gigabit AccessPoint, dual SSID, 5-Port Switch, DD-WRT
Article No. 81747
Linksys / Broadcom acces point 802.11gn with 5-port gigabit switch, 2 preconfigured networks (dual SSID) ideal for our hotspot server products
This access point together with
Hotspot
Server gives you as the customer many advantages, which are described below.
Every access point features an public network (Hotspot) and a private network (LAN). Customers and guests connect with the Hotspot network and as soon as they wish to surf the internet, they will receive a welcome/login page, so they can login typping their username and password.
Clients can only connect to the private network (LAN) of the access point if they own the WPA key (employee). As soon as the client connect with access point they can then access the internet and exchange data with other LAN clients.
74.90 EUR
89.13 € incl. 19% VAT
5 pcs
7.0 % discount
50 pcs
Inquiry
Product Features
2T2R MIMO 2.4 GHz, 802.11g, 802.11n, 300Mbit
Broadcom Accelerange Technology for better coverage and range
5-Port Megabit switch, 3-ports for public/hotspot, 2-ports for private/LAN
dual WLAN Networks: public/hotspot, private/LAN/WPA2
2x 1.5dBi integrated antennas
Wall mountable via 2 screws
Size: (WxDxH) 202x160x34mm, 0.3kg
Installed and preconfigured with DD-WRT
With integrated ´Sylbek Configuration Assistant´ you can easily switch between
DualSSID
and
WDS
mode
With this access point can be achieved an TCP-throughput up to 120 Mbit wirelessly and 700 Mbit over Switch.
The Access Points are installed with DD-WRT software and come pre-configured.
DD-WRT
software offers you stability and many other professional functions.
All devices that we deliver are pre-configured for network operation. This means that the access points have a unique IP and MAC address (prerequisites for network operation). Customers will receive a setup guide from us as well as all the necessary access data in case that you wish to change the default configuration.
You can deploy multiple devices in a single building. See below for an example of a three floor building with 2 Access Points on each floor.
Click on the picture for a better representation
Hotspot network with multiple access points and dual networks pro access point
To save on cabling costs you can use the 5-Port switch to extend Cat5 cable, as shown in the graphic. If a network client does not have a suitable WLAN device attached, they can be connected to next access point via cable using either the LAN or Hotspot port.
If you use a single cable for each access point then you can also power the device over ethernet cable (PoE). For these access points are optionally following products available:
PoE Passiv Set - Injector + 20m Cat5e Cable + Splitter
PoE 802.3af Adapter 48V & Splitter 5v 9v 12v
Plastic box 270x200x52mm IP65 f. Router, Switch, AccessPoint
All access points are pre-configured and labelled so that you only have to position and connect up the units.
The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering):
Username, Password, WPA_Key, IP-Address, Public_SSID_Name, Private_SSID_Name, Hide_Private_SSID
This service costs a flat rate fee of €120 net per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware.
If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).
Further products
RSMA-N Adaptor
5.25 EUR
6.25 € incl VAT
t.shaper SBR460-1U-TS
649.00 EUR
772.31 € incl VAT
t.shaper SBR75G-TS
285.00 EUR
339.15 € incl VAT
VIA Intenet Terminal
149.00 EUR
177.31 € incl VAT
© Copyright 2003 - 2012
Sylbek - Internet Technology
