Hotspot Solution Reseller en
  
  Home  
  Shop  
  Services  
  Solutions  
  Hotspot  
  Contact  







 

Hotspot Server


Hardware & Software
for
Hotel & Café
  Category: AccessPoint_WDS   Manufacturer: Cisco_Systems Search tips...


Linksys Gigabit WDS AccessPoint 802.11n, 5-Port Switch, DD-WRT

Article No. 81748


These Linksys / Broadcom Access Points connect wirelessly to each other (WDS/Bridge). Clients can connect to any acess point wirelessly or per cable.



These access points enable you to build or extend an existing network. All clients which are either connected wirelessly or per cable via the 5 port switch, are intergral members of the network.

These access points are delivered preconfigured and installed with DD-WRT Software.
DD-WRT offers you stability and professional functionality.


sylbek.eu linksys gigabit wds lan tcp


74.90 EUR  
89.13 € incl. 19% VAT
5 pcs 8.6 % discount
50 pcs Inquiry
Product Features
  • 2T2R MIMO 2.4 GHz, 802.11g, 802.11n, 300Mbit
  • Broadcom Accelerange Technology for better coverage and range
  • 5-Port Gigagabit Switch
  • dual WLAN Networks: public/hotspot, private/LAN/WPA2
  • 2x 1.5dBi integrated antennas
  • Wall mountable via 2 screws
  • Size: (WxHxD) 202x160x34mm, 0.3kg
  • Installed and preconfigured with DD-WRT
  • With integrated ´Sylbek Configuration Assistant´ you can easily switch between WDS and DualSSID mode




With this access point can be achieved an TCP-throughput up to 120 Mbit wirelessly and 700 Mbit over Switch.

All devices are pre-configured for network operation. This means that the access points have a unique IP and MAC address (prerequisites for network operation). Customers will receive a setup guide from us as well as all the necessary access data in the event that the default configuration needs to be changed.

Installing these access points requires minimal cabling. The diagram below shows how the access points can function as a group. Each group consists of 2 or 3 accesspoints. The connection to the next group (next floor) can be extended with cable from the 5-Port switch.
See below for an example of a three floor building with 3 Access Points on each floor.

Click on the picture for a better representation

Hotspot Netzwerk mit mehreren Accesspoints
WDS access point installation for minimal use of cable


For wall mounting are boxies available, the smallest possible one is: Plastic box 270x200x52mm IP65 f. Router, Switch, AccessPoint

The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering): Username, Password, IP-Address, SSID_Name

This service costs a flat rate fee of €95 per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware. If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).

 



Further products

Firewall SBR230-FW


sylbek.eu firewall sbr230-fw usb cpu ram vpn lan tcp
329.00 EUR
391.51 € incl VAT

Hotspot SBR450-HS


sbmi3gb sylbek.eu hotspot sbr450-hs cpu ram dns qos vpn lan nat wpa
659.00 EUR
784.21 € incl VAT

t.shaper SBR460-1U-TS


bandbreitenbegrenzung bandbreitenmanagement bandbreite begrenzung controller sylbek.eu t.shaper sbr460-1u-ts vpn pci tcpsb
649.00 EUR
772.31 € incl VAT

10m-Ecoflex10


ecoflex connector cable lmr400 rg8 sylbek.eu 10m-ecoflex10 usb sma tnc
34.47 EUR
41.02 € incl VAT
 
 
 
© Copyright 2003 - 2012 Sylbek - Internet Technology