Home
Shop
Services
Solutions
Hotspot
Contact
Hotspot Server
Hardware & Software
for
Hotel & Café
Category:
Restposten-Remnants
Manufacturer:
Netgear
Netgear 300Mbit AccessPoint, WDS/Bridge, 5-Port Switch, DD-WRT
Article No. 81720
These Netgear / Broadcom Access Points connect wirelessly to each other (WDS/Bridge). Clients can connect to any acess point wirelessly or per cable.
These access points enable you to build or extend an existing network. All clients which are either connected wirelessly or per cable via the 5 port switch, are intergral members of the network.
These access points are delivered preconfigured and installed with DD-WRT Software.
DD-WRT
offers you stability and professional functionality.
59.99 EUR
71.39 € incl. 19% VAT
Product Features
2T2R MIMO 2.4 GHz, 802.11g, 802.11n, 300Mbit
Broadcom Accelerange Technology for better coverage and range
5-Port Megabit switch
2x 1.5dBi integrated antennas
Size: (WxHxD) 5x130x178mm, 0.4kg
Installed and preconfigured with DD-WRT
Bandwidths up to 78 Mbit net (TCP-throughput) can be achieved wirelessly or per cable with this access point.
All devices are pre-configured for network operation. This means that the access points have a unique IP and MAC address (prerequisites for network operation). Customers will receive a setup guide from us as well as all the necessary access data in the event that the default configuration needs to be changed.
Installing these access points requires minimal cabling. The diagram below shows how the access points can function as a group. Each group consists of 2 or 3 accesspoints. The connection to the next group (next floor) can be extended with cable from the 5-Port switch.
See below for an example of a three floor building with 3 Access Points on each floor.
Click on the picture for a better representation
WDS access point installation for minimal use of cable
For wall mounting are boxies available, the smallest possible one is:
Plastic box 270x200x52mm IP65 f. Router, Switch, AccessPoint
The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering):
Username, Password, IP-Address, SSID_Name
This service costs a flat rate fee of €95 per order independent of the number of units required.
All settings supplied from us are hard programmed into the firmware. If you perform a hardware reset on these broadcom access points, the preconfigured data including your presettings will be restored (delivery configuration).
Further products
Linksys SRW2024
399.75 EUR
475.70 € incl VAT
Firewall SBR230-FW
329.00 EUR
391.51 € incl VAT
Firewall SBR410-1U-FW
469.00 EUR
558.11 € incl VAT
70Mbit Bridge Indoor
99.00 EUR
117.81 € incl VAT
© Copyright 2003 - 2012
Sylbek - Internet Technology
