Hotspot Solution en
 
  Home  
  Shop  
  Services  
  Solutions  
  Hotspot  
  Contact  







 

Hotspot Server


Hardware & Software
for
Hotel & Café

  Category: AccessPoint_WDS   Manufacturer: Ubiquiti_Networks Search tips...


Outdoor AccessPoint Solution 802.11n incl. 6dBi Antenna & PoE

Article No. 81711


2.4 GHz Outdoor access point with integrated 6dBi omni antenna, for over 50Mbit TCP-Throughput, wall and mast mounting, Power over Ethernet, 15m cable






 sylbek.eu 802.11n outdoor poe tcp web


149.99 EUR  
178.49 € incl. 19% VAT
10 pcs 11.1 % discount
100 pcs Inquiry
Product Features
  • Atheros MIPS 24KC, 400MHz, 32MB SDRAM, 8MB Flash
  • 2.4GHz 802.11n, TX power: 27dBm, achieves 50Mbps nett, TCP-Throughput
  • 1x RJ-45 100 Mbit Ethernet
  • Outdoor Case UV Stabalized Plastic
  • Power consumption Max. 5 Wat
  • Operating Temperature -20°C bis 70°C
  • 5 to 95% Condensing
  • Integrated N-type Male Jack
  • Approvals: FCC Part 15.247, IC RS210, CE, RoHS
  • Software: Linux 2.6 AirOS, SDK available


This access point includes a 6dBi omni antenna directly connected
(no cable loss) with beamwidth: horisontal 360° / vertical 25°


Access points come pre-configured as follows, however these data can be changed.

- Web access data, password, eventually username, IP, SSID
- Change country (delivery setting is Germany) if needed
- Change channel/frequency in range 2412 - 2462 MHz (delivery setting is 11/2462Mhz)
- After alignment the transmit power level (delivery setting is 27dBm) must be reduced to 14 dBm
- Nach der Ausrichtung müssen Sie die Sendeleistung (bei der Auslieferung 27dBm) auf 14 dBm reduzieren.

Transmit power levels and frequency ranges for wireless networks on 2.4Ghz are uniformly set across Europe. Therefore, in accordance with legislation, you should adjust power levels so that your transmit power plus antenna gain achieve a maximum 20dBm, which corrresponds to 100mW
(e.g. 12 dBm plus 8dBm antenna gain = 20dBm).

The following configurations can be optionally pre-configured for you as required (send the following infos via email or when ordering): Username, Password, IP-Address, SSID_Name. This optional service costs a flat rate fee of €32 per order independent of the number of units.

If you perform a hardware reset on this access point, the preconfigured data
including your presettings will be lost!

Telephone support is available for this product.

 



Further products

Firewall SBR218-1U-FW


 sylbek.eu firewall sbr218-1u-fw usb cpu ram vpn tcp

479.00 EUR
570.01 € incl VAT



NAS Server SBNS217R


 sylbek.eu nas server usb cpu ram lan ftp nas web xml

449.00 EUR
534.31 € incl VAT



Linksys SPA3000


voip gateway spa3000 spa3102-eu sylbek.eu linksys spa3000 lan

63.95 EUR
76.10 € incl VAT



Firewall SBR410-1U-FW


 sylbek.eu firewall sbr410-1u-fw usb cpu ram vpn lan pci tcp

485.00 EUR
577.15 € incl VAT



 
 
 
© Copyright 2003 - 2012 Sylbek - Internet Technology