Thin Client Computers en
 
  Home  
  Shop  
  Services  
  Solutions  
  Hotspot  
  Contact  







 

Hotspot Server


Hardware & Software
for
Hotel & Café

  Category: Traffic-Shaping   Manufacturer: Sylbek Search tips...


Traffic Shaper & Bandwidth Manager SBR116-TS 1.6Ghz, Gigabit

Article No. 81683


Regulates bandwidth and prioritises designated network services. 1.6Ghz CPU with Gigabit network cards for 500 users and 600Mbit net throughput.



The traffic shaper can be deployed anywhere where surf speeds suffer on a network due to other users initiating large downloads. In a normal network environment any user can so use up to 90% of the available bandwidth, even if other users are surfing at the same time.
By using the traffic shaper a user can for example, have 25% of the bandwidth in case that altogether 4 users are using internet.

Furthermore the traffic shaper decides, which network services have priority. The normal surfer will for example have priority over users visiting P2P sharing sites.

SBR116-TS with over 600 MBit TCP net throughput, can be used for bandwidth optimisation in a gigabit network, where hundreds of users access one or more servers at the same time.



bandbreitenbegrenzung bandbreitenmanagement bandbreite begrenzung controller sylbek.eu t.shaper sbr116-ts cpu vpn tcp


449.00 EUR  
534.31 € incl. 19% VAT
3 pcs 12.5 % discount
30 pcs Inquiry
Advantages of the traffic shaper SBR116-TS
  • Can connect to all networks (like a switch) without worrying about existing network components.
  • Users do not need to logon, since the network devices can be differentiated through their MAC addresses
  • Dynamic maximum bandwidth adjustment for each network device
  • Network services prioritisation for VOIP, HTTP versus P2P and other data flow. Allocation of bandwidth for each group including upload and download
  • Customer orientated expandability for other services
  • Firewall protocollling of IP connections (all sources and destination IP’s along with the port can be protocolled)
  • SBR116-TS is designed for bandwidth optimisation in gigabit networks with 500 users
  • Small (218x190x62mm), fanless, less power consumption of 12W
  • Easy installation and settings adjustment. Telephone support included
  • Discounts for repeated sales to resellers


The SBR116-TS will be preinstalled and configured for use as a bridge. For use as a basic bridge to regulate bandwidth dynamically, it may be necessary to adjust the download speed (preset to 600MBit) and Upload (preset 200MBit).

The diagram below shows how the maximum bandwidth will be halved when two users simultaneously download from the internet. The same principle applies for uploads.


Click on the picture to enlarge it
Sylbek Traffic Shaper in Bridge Mode
Sylbek Traffic Shaper in bridge mode


The traffic shaper can, along side the dynamic adjustment of bandwidth, handle other services individually. To assist this load the pre-configured Firewall settings. The diagram below shows how the four preset groups are handled. The listed bandwidth values in the diagram are examples only. The unit can be reconfigured for any bandwidth value (infinitely variable).


Click on the picture to enlarge it
Sylbek Traffic Shaper - Bridge withewall
Sylbek Traffic Shaper - Bridge with Firewall



Deployment example 1
A company with 140 employees had in fact good connections to the internet. However the VPN connection to the main office was sometimes slow. By using the traffic shaper with integrated firewall, a VPN rule was defined with second highest priority after HTTP and HTTPS. Because HTTP/HTTPS traffic was only allocated 25% of the available bandwidth enough remained for VPN traffic, which was also prioritised over other services. Furthermore an improvement in network performance was noted after the unit was placed between the server and workstations


Deployment example 2
A school with 1600 pupils had 32 MBit internet connection, but never-the-less the connection was slow when around 300 pupils were simultaneously on the internet. Installing the traffic shaper allowed the bandwidth to be distributed evenly. When 300 pupils surf simultaneously with an average 2 sec delay for downloads(surfing) and an average 20 sec delay for reading (no downloading), gives us a practical figure of roughly 1Mbit per pupil (32768 KBit/30 pupils=1092 KBit). Should a user perform a long download, the network will suffer a negative influence of up to a maximum 1 Mbit. Surf speeds can be further increased when HTTP traffic receives a higher priority over other services by using the integrated firewall.

 

Further informations t.shaper SBR116-TS



Further products

Linksys SRW2024


 sylbek.eu linksys srw2024 qos web

399.75 EUR
475.70 € incl VAT



hotspot-access


 sylbek.eu hotspot-access

10.00 EUR
11.90 € incl VAT



10m-Ecoflex10


ecoflex connector cable lmr400 rg8 sylbek.eu 10m-ecoflex10 usb sma tnc

34.47 EUR
41.02 € incl VAT



Linksys DualSSID Gigabit


 sylbek.eu linksys dualssid poe wds lan tcp wpa

74.90 EUR
89.13 € incl VAT



 
 
 
© Copyright 2003 - 2012 Sylbek - Internet Technology